Skip to content 
Checking and Aligning the Tracks
Misaligned tracks can make your garage door run unevenly or even jam. Here is how to check and correct for correct alignment:
Check Tracks
Search for anything that is not right. The gap between the rail and rollers bends, or obstacles.
Loosen Mounting Brackets
Using a socket or wrench, slightly loosen the screws holding the tracks to your garage door frame.
Adjust for Alignment
You will need to determine the orientation of these settings however if your tracks are too far off. The higher the precision, the better you can use a level tool. Adjust until the track lines up and is level even if it takes two or three tries. When they are flush at last--line up with one another.
Adjusting the Tension of the Springs
Your garage door springs are there not only for the weight of the door but also to balance it. Incorrect tension will cause a door to open too quickly or not at all.
Safety First
Trying to adjust garage door springs by yourself can be dangerous. If you aren't experienced in dealing with high-tension springs, it's better for a professional to be called out.
Testing the Balance
Disconnect the opener via the release handle and manually lift the door halfway up. It should stay there; if not, adjustments are needed.
Adjusting the Torsion Springs
If the door is too heavy, increase its tension by turning the spring adjustment cone clockwise. If it's too light, decrease the tension by turning it counterclockwise.
Setting the Opener Limits
The limit switch setting determines how far the garage door opens or closes; improper settings can result in the door closing too hard or not quite enough.
Here you will find the Limit Adjustment Screws
These are usually located on the side of the garage door opener motor.
Adjust the Open Limit
If your door doesn’t open well, turn the ‘Up’ limit adjustment screw clockwise. If it goes too far, turn it counterclockwise.
Adjust the Close Limit
If your door doesn’t completely close, turn the ‘Down’ limit adjustment screw clockwise. If it
Lubricating Moving Parts
Regular lubrication ensures smooth operation of your garage door and protects its components from damage.
Testing the Auto-Reverse Safety Feature
The auto-reverse feature is a critical safety function that keeps the door from closing on objects – including people and pets.
Regular Maintenance Checks
To keep your garage door in top condition, regular maintenance plays a key role:
Conclusion
